Troubleshooting - Samsung FP-T5084 Owner's Instructions Manual

i Appendix ]
Troubleshooting
if the TV seems to have a problem, first try this list of possible problems and solutions.
if none of these troubleshooting tips apply, call your nearest Samsung service center.
Problem Possible Solution
Poor picture quality. Try another channeI.
Adjust the antenna.
, Check a!l wire €_0nnec!ions.
Poor sound quallt_ Try another channel
Adjust the antenna:
No picture or sound. Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
Make sure the MUTE button is off.
No sound or sound is too tow a_ First, check the volume of units connected to your TV (digital broadcasting receiver, DVD, cable
maximum voiume, b[oadcas!!ng recei}(er! _(CR, etc.). _The n, adjust the TV yolume acc°[dingiy -
Picture roils vertically. Check all connections.
The TV ooerates erratically. LJnPtug tt]e TV f2]- 30 secpnds, then try fipera!ing it again.
The TV won't turn on. Make sure !he _/a!!ou!le! is work!rig.
Remote control malfunctions Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
Press the TV button to put your remote control in the TV mode.
Make sure the remote has batteries.
Cl_eckthat g_eilt" and '-' ends €!ftt]e ba!!e[ies ale inse_ed co]'[ec!]Y: . .........................................................
Digital broadcasting screen problem Please check the digital signal strength and input antenna.
The image is too tight or too dark. Adjust the Brightness and Contrast.
AdJHs!!!?eE!ne tu[_!n#: . ........................
The image is too large or too small A_Jjus!!he size settings. .......................................................................
The visual nualities of digita channels The visual qualities of digital channels may vary depending on the original production method
vary. (analog or digital).
If the original production method is digital: High visual quality.
If the original production method is analog: The digital program displayed on the screen is
originally an analog program which has been converted to digital.
The v!suaI quali!y is 0f an SE!(stag_la!'dDefinit!?9) grade -
screen is black and Dower ine_ca_or On your computer; check the Power and Signal Cable.
light blinks steadll} The TV is using its power management system.
Mtve the 9tnlputer's mguse 9r pre?s any key 9n the ke_{bRard: .............
On your equipment check (STB, DVD, etc) ; Power and Signal Cable.
The TV is using its power management system.
Press the Source button on the panel or remote control.
Turn the TV off and on.
Although the TV caption shows HD The HD(High Definition) caption that appears when switching channels or when pressing the
[ne visual quality is not satisfactor\ information button on the remote control means the selected channel is a digital channel. If the
broadcasting station converts an analog signal into digital and transmits the signal, the visual
quality may not be pedefi t.