Samsung FP-T5084 Owner's Instructions Manual page 48

Sett_the
On/Off Timer
Use this feature to set the TV to turn on or off at a desired time. You must set
the clock first.
Press the MENU button to display the menu.
Press the A or T button to select Setup, then press the ENTER button.
Press the A or T button to select Time, then press the ENTER button.
Press the A or T button to select Timer1, Timer2,or Timer& then press the
ENTER button. The timer menu is displayed.
Press the h, or T button to adjust hour, then press the I_ button to move to the
next step. Set other items using the same method as above.
Press the _ or _ button to select the desired item below.
Press the _, or _' button to adjust the setting.
Press the EXIT button to exit.
Repeat
Volume
Contents
Activate or Inactivate
Select Once. Everyaay, Mon-Fri. Mon- Sat
Sat-Sun. Sets the des red day(s) of the
week you want the TV to [urn on
Select the desired turn on volume level
When the On Timer is active, you can
[um on a specific channelor p_ayback
con[en[s sucn as photoor audio files.
(Make sure that an USB device is
connectea to your TV.)
S the A or V button
s the ,& or _ button
Press the A or _' button
You can set the hour, and minute directly by pressing the number buttons on
the remote control.
_-- Auto Power Off
When you set the timer On, the television will eventually turn off, if no
controls are operated for 3 hours after the TV was turned on by timer.
This function is only available in timer On mode and prevents overheating,
which may occur if a TV is on for too tong time.
Timer
The sleep timer automatically shuts off the TV after a preset time (30, 60, 90,
120, 150 and 180 minutes).
1 Press the MENU button to display the menu.
Press the A or T button to select Setup, then press the ENTER button.
Press the _, or _' button to select Time, then press the ENTER button.
2 Press the _, or T button to select Sleep Timer, then press the ENTER button.
3 Press the A or T button to select the minute.
Setting the Timer sets the Activation to On automatically.
To cancel the set sleep timer:
Press the D,, button to select Activation.
Press the _, or _' button to select Off, then press the ENTER button.
Press the EXIT button to exit.
Press the SLEEP button on the remote control until the appropriate time intervai appears
(any of the preset values from 30 min to 180 min).
I SLEEP SRS faTS CI I
h___J[ t,o o,,, jj_____j