Samsung FP-T5084 Owner's Instructions Manual page 47

Ojotion 2: Settingthe Clock Automatically
The Clock can be set automatically if you are receiving a digital signal.
1 Press the MENU button to display the menu.
Press the A or T button to setect Setup, then press the ENTER button.
Press the A or _' button to setect Time, then press the ENTER button.
2 Press the ENTER button to select Clock.
3 Press the ENTER button to select Clock Mode.
Press the A or _' button to select Auto, then press the ENTER button.
4 Press the A or T button to select Time Zone, then press the ENTER button.
5 Press the A or _' button to highlight the time zone for your local area, then
press the ENTER button.
Press the A or _' button to select DST (Daylight Saving Time), then press the
ENTER button.
Press the A or _' button to setect On or Off, then press the ENTER button.
Press the EXIT button to exit.
_-- Depending on the broadcast station and signal, the auto time may not be set
correctly. If this occurs, set the time manually.
_-- Antenna or Cable must be connected in order to set the time automatically.
Continued...