Before Using Your Dvd Player; Selecting The Video Format; To Operate The Tv And Dvd Player With A Single Remote Control; Using Yourdvdplayer - Samsung HT-DB600 Instruction Manual

Using YourDVDPlayer
player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc
you are using, these instructions may vary slightly. Read the instructions carefully before using.
¢: : d
C_ ::.) CZ:) CZ:)
the Video Format
%
and DVD Player with a Single Remote Control
Turn off the main unit and then press NTSC/PAL
• By default, the video format is set to "NTSC".
• Each time the button is pressed, the video format switches between "NTSC"
and "PAL".
• Each country has a different video format standard.
• For normal playback, the video format of the disc must be the same as the
video format of your TV.
Press MODE button.
• Each time the Mode button is pressed, the TV indicator (red) and the DVD RECEIVER indicator (green) will flash alternately.
• You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.
• Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VlDEO, and Numeric (0-9) buttons.
• By default, the remote control is set to work with Samsung TVs.
See page 63 for more information on the operation of the remote control.