Before Using Your Dvd Player - Samsung HT-DB390 Instruction Manual

Before Using Your DVD Player

Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc
you are using, these instructions may vary slightly. Read the instructions carefully before using.
1
4
Selecting the Video Format
19
Plug the power cord into
the AC power supply.
Press TV/VIDEO button to
select VIDEO mode.
Turn off the main unit and then press NTSC/PAL.
•
By default, the video format is set to "PAL".
•
Each time the button is pressed, the video format
switches between "NTSC" and "PAL".
•
Each country has a different video format standard.
•
For normal playback, the video format of the disc must
be the same as the video format of your TV.
2
Press the MODE button so
that the TV indicator on the
remote control flashes.
TV DVD RECEIVER
Press the MODE button so
5
that the DVD RECEIVER
indicator on the remote
control flashes.
TV DVD RECEIVER
To Operate the TV and DVD Player with a Single Remote Control
Press MODE button.
•
Each time the button is pressed, the TV indicator (red) and the DVD Receiver indicator (green) will flash
alternately.
•
You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.
•
Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.
•
By default, the remote control is set to work with Samsung TVs. See page 63 for more information on the
operation of the remote control.
3
Press the POWER button to
turn on the TV.
6
Press DVD button to select
DVD/CD mode.
20