Connecting The Video To Tv; P.scan Function; What Is Progressive Scanning? - Samsung HT-DB600 Instruction Manual

necting the Video to TV
;IressiveScan)
Function
gular Interlace Scan in which two fields of picture information are alternated to
create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one
field of information (all lines displayed in one pass)to create a clear and detailed picture
without visible scan lines.
While the player is in the Stop mode, hold the P,SCAN button down for longer
than 1 second.
• The selection switches back and forth between "P.SCAN" and "I.SCAN" each time the button is held
down for a minimum of 1 second.
• The previous mode is indicated in the display first, followed by the selected mode in about a second.
Component 8.V_O Composits ]
vleeo Vld_
* Depending on your TV, Component Video inputconnectors may be marked as DVD Video inputconnectors.
Composite Video (Good Quality)
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system
to the VIDEO IN jack on your television.
S-Video (Better Quality)
If you television is equipped with an S-Video input, connect an S-Video cable (not supplied)
from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on
your television.
Component Video (Best Quality)
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
• When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed
any signals. See page 16 to select Progressive Scan.
• This function works only on TVs equipped with component video inputs(Y, Pr, Pb) that support Progressive
Video. (It does not work on TVs with conventional component inputs,i.e., non-progressive scan TVs.)
• Depending on the brand and model of your TV, this function may not work.
15 16