Setting Up; Selecting The Best Location; When Moving Your Refrigerator; Flooring - Samsung RF4287HAWP User Manual

Sett
jr French Door Refrgerator
GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations on your purchase of the Samsung French Door Refrigerator.
We hope you enjoy the state-of-art features and efficiencies that this new appliance offers.
Selecting the best location for the refrigerator
,, A location with easy access to the water supply.
,, A location without direct exposure to sunlight.
,, A location with a leveled floor.
,, A location with enough space for the refrigerator doors to open easily.
,, Allow sufficient space for air circulation of the internal cooling system. ] 2,,_
If the refrigerator does not have enough space, the internal cooling system may not
work properly.
\
If your refrigerator has an ice maker, allow extra space at the back for the water line
connections.
When you install the refrigerator next to a fixed wall, minimum clearance is 3 sA" (95mm) between the refrigerator
and wall to allow the door to swing open.
First thing! Make sure that you can easily move your refrigerator to its final location by measuring doorways (both
width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung French Door .
Refrigerator.
Overall
Model Depth "A" Width "B" Height "C" Depth "E"
Height "D"
33.78" 35.75" 66.19" 69.88" 36.22"
RF4287HA
(85.8 cm) (90.8 cm) (168 cm) 177.4 cm (92 cm)
@
Allow clearance to the right, left, back and top when installing.
This will help reduce power consumption and keep your energy bills lower.
Do not install the refrigerator where the temperature will go below 50°F
(10°C).
Do not locate the refrigerator where it may become wet.
When moving your refrigerator
A To prevent floor damage, be sure the front adjusting legs
CAUTION are in the up position(above the floor).
Refer to 'Adjusting the doors' in the manual (on page 19).
FLOORING
For proper installation, this refrigerator must be placed on a leveled
surface of hard material that is the same height as the rest of the
flooring. This surface should be strong enough to support a fully
loaded refrigerator, or approximately 3591bs (165kg). To protect the
finish of the flooring, cut a large section of the cardboard carton and
place under the refrigerator where you are working. When moving
a refrigerator, it is needed to pull and push in the back-and-forth
direction.
Flat-blade
screw driver(-)
Control Lever
08 setting up