Setting Up The Refrigerator - Samsung RS542NCAE Series User Manual

SETTING UP YOUR SIDE-BY-SIDE REFRIGERATOR

SETTING UP THE REFRIGERATOR

Now that you have your new refrigerator installed in place, you are ready to set
up and enjoy the full features and functions of the appliance.
By completing the following steps, your refrigerator should be fully operational. If
not, first check the power supply or try the troubleshooting section at the back
of this user guide. If you have any further questions, contact your Samsung
Electronics service center.
1. Place the refrigerator in an appropriate location with reasonable clearance
between the wall and the refrigerator. Refer to installation instructions in this
manual.
2. Once the refrigerator is plugged in, make sure the interior light comes on
when you open the doors.
3. Set the temperature control to the coldest temperature and wait for an
hour. The freezer should get slightly chilled and the motor should run
smoothly.
4. After powering the refrigerator, it will take a few hours to reach the
appropriate temperature. Once the refrigerator temperature is sufficiently
cool, you can store food and drink in the refrigerator.
Setting up_15