Table of Contents
Advertisement
MAIN
MENU
VIDEO
ADJUST
TIMER
COMPONENT
ADJ.
I AUDIO
ADJUST
CLOSED
CAPTION
PARENT
CONTROL
LANGUAGE
I,E_R_ SAVE
ENERGY
SAVE
QSTATUS:OFF
RETURN
ENERGY
SAVE
eSTATUS:ON
RETURN
'{A,v]
to
move
cursor
,[_]
to
set
The ENERGY SAVE Menu
This feature reduces
the brightness
of the picture, lowering the power
consumption
of your TV/VCR by approximately
20 percent.
1.
Press MENU on the remote (the main MENUappears).
2.
Press the up or down arrow button to select ENERGY SAVE and press OK.
3.
Press the left or right arrow button go back and forth between
ON and OFF.
4.
Press MENU to exit.
MAIN
MENU
TIMER
VIDEO
ADJUST
COMPONENT
ADJ.
AUDIO
ADJUST
CLOSED
CAPTION
PARENT
CONTROL
LANGUAGE
ENERGY
SAVE
OSET
UP
{A,vl
to
move
cursor
[OK]
to
set
Additional
Settings in the SETUP Menu
Most of the options
in the SETUP menu were discussed
in Chapter 1, but there
are a few other settings within this menu that you can adjust to your personal
preferences.
1.
2.
Press MENU on the remote (the main MENU appears).
Press the up or down arrow
to
select SET UP and press OK (the following
choices appear):
UNIVERSAL
PLUS
This feature is sometimes
called auto tuning. The auto-
tuning feature automatically
tunes the TV to the correct channel for different
components
you have connected
to your TV (like a VCR or DVD Player,
etc.).
When you set up auto tuning in the Universal Plus menu, you don't have to
remember
to change your TV to channel 3, for example, when you want to
watch the tape that's in your VCR. To set up the UNIVERSAL PLUS menu:
1.
2.
Since UNIVERSAL PLUS is the first item, just press the OK button on the
remote control (the UNIVERSAL PLUS menu appears).
If you've connected
a VCR to your TV with audio/video
cables (i.e., to a
LINE IN jack on the TV), press INPUT until the corresponding
video input
channel appears -- LINE 1, LINE2, LINE3, or COMPONENT. If you
connected
a VCR to your TV with a coaxial cable (i.e., to the ANT/CABLE
jack on your TV), use the number
buttons on your remote to enter the
channel that corresponds
to the switch on the back of your VCR (usually
channel 3 or 4).
3. Press the down arrow button to highlight status. Press the left or right
arrow button to switch between
ON and OFF.
4. To exit, press MENU.
Continues
on next
page
Chapter
4
35
Advertisement
Table of Contents
