Table of Contents
Advertisement
Using the Playback
Features
This feature allows you to quickly return to a time counter reading
of 0:00:00. This is especially convenient when you want to watch a
segment of the tape several times.
1. Insert the pre-recorded tape. Press STOP.
2. Press DISPLAY twice to display only the time counter.
3. Use PLAY, FF, or REW to locate the start of the segment you
want to repeat.
4. Press CLEAR to reset the time counter to 0:00:00.
5. Continue playing the tape and press STOP when you reach the
end of the segment you want to repeat.
6. Press SEARCH twice to display the ZERO SEARCH screen. The
current time counter is displayed.
7. Press REW or FF to return to 0:00:00.
The tape rewinds or fast forwards to the 0:00:00 and begins
playing.
Zero
Search
ZERO
SEARCH
Current
tape
counter
is
0:12:34
Press
REW
to
go
to
0:00:00
Press
SEARCH
to
exit
.......
OR .......
ZERO
SEARCH
Current
tape
counter
is
-0:12:34
Press
FF to
go
to
0:00:00
Press
SEARCH
to
exit
Blank
Search
The TV/VCR will search for blank portions of the tape that are more
than six seconds in length.
1. Insert the pre-recorded tape and press STOP.
2. Press SEARCH three times to display the BLANK SEARCH
screen.
BLANK
SEARCH
Press
FF
to
begin
searching
for
blank
section
of
tape.
Press
SEARCH
to
exit
3. Press FF to begin searching for a segment that is at least six
seconds of blank tape.
4. Press STOP to stop BLANK SEARCH.
17
Advertisement
Table of Contents
