Table of Contents
Advertisement
Supplied Anterma, Anterma, or Cable System
Without a Cable Box
A.
Supplied
Antenna
Follow these steps to connect the supplied
antenna to your TV/VCR. Do not connect
this antenna if you plan to connect a
different type of indoor or outdoor antenna
or cable system.
1. Insert the antenna
base into the slot on
the back of your TV/VCR.
2. Connect
the twin-lead
ends of the
antenna
to the screw terminals
of the
supplied
antenna
adapter.
3. Connect
the antenna
adapter
to the IN
FROM ANTENNA jack on the back of the
TV/VCR.
4. Plug in the TV/VCR's
power cord.
5. Turn to page 2 for "Setting
Up the
TV/VCR."
Adjust the length and position of the antenna
rods for the best reception.
• For viewing VHF channels, extend the
rods fully.
• For UHF viewing, shorten the rods.
Supplied Antenna
Antenna Slot
Twin-Lead
Ends
Antenna Adapter
(supplied)
\
\
AN_IENN
AUD_0
Vrl)E0
Back of TV/VCR
B.
Outside
Antenna,
Set-top
Antenna,
or Cable
System
Without
a Cable
Box
1. Connect
as shown.
This connection may require additional
accessories not provided.
2. Plug in TV/VCR's
power cord.
3. Turn to page 2 for "Setting
Up the
TV/VCR."
Match
Your Type of Antenna
or Cable
Antenna
Adapter
{supp e<]i
(a
i_
_UFU
9tO
Back of TV/VCR
26
Advertisement
Table of Contents
