Table of Contents
Advertisement
Operating Instructions
Zero Search
This feature allows you to quickly return to a time counter reading of
0:00:00. This is especially convenient when you want to watch a
segment of the tape several times.
1.
Insert the pre-recorded tape and press STOP.
2.
Press INFO on the remote twice to display only the time counter.
3.
Use PLAY, FORWARD, or REVERSE on the remote to locate the start
of the segment you want to repeat.
4.
Press CLEAR to reset the time counter to 0:00:00.
5.
Continue playing the tape and press STOP when you reach the end
of the segment you want to repeat.
6.
Press SEARCH twice to display the Zero Search screen. The current
time counter is displayed.
7.
Press REVERSE or FORWARD on the remote to return to 0:00:00.
The tape rewinds or fast forwards to the 0:00:00 and begins
playing.
Blank Search
The TV/VCR will search for blank portions of the tape that are more
than six seconds in length.
1.
Insert the pre-recorded tape and press STOP.
2.
Press SEARCH on the remote three times to display the Blank
Search screen.
3.
Press FORWARD to begin searching for a segment that is at least
six seconds of blank tape.
4.
Press STOP to stop Blank Search.
2 7
Advertisement
Table of Contents
