Table of Contents
Advertisement
TV LED24B45RQ is packaged with the TV stand separated from the cabinet. To setup the TV table stand, please carry out the
installation according to the instructions below.
Step One
Place the TV faced down on a soft cloth or cushion to prevent the
panel from being damaged.
/
/
The panel can be scratched easily, so please:
1. Choose an absolutely flat surface to place the TV on.
2. Use soft cloth or cushion to face the TV panel.
Do not put TV on the table directly.
!_1 ,m
Always unplug the AC cord first when installing/removing
the stand.
Step Two
Take the neck. Please align the screw holes of the neck and the
TV, and then insert the 3 screws into the 3 holes on the neck and
tighten them.
Pedestal Screws
Quantity
Part #
M4 x 12mm
3pcs
RS01TB41 2H
I
Step Three
Take the base. Please align four holes of the base and four
screwholes
of the neck, insert the base to the neck, and then
insert the 4 screws and tighten them.
Longer
side
Please take note of the base direction:
O
O
Longer
side
o
* Washerplate should be shown on bottom side of the stand base
The bottom view of the TV (Front cabinet faces down)
Pedestal Screws
Quantity
Part #
J
M4 x 12mm
4pcs
RS01TB41 2H
J
9
Advertisement
Table of Contents
