Tv Stand Installation/Removal; Wall Mounting; Tv Placement Setup - RCA RLDEDV2813-A-B User Manual

.

1.2 TV PLACEMENT SETUP

TV Stand Installation/Removal

1. Place the unit face down on a soft surface.
Gently position the glass base to the leg at the bottom of the TV.
2.
Insert the column corresponding position with the threaded screw size M4 * 20(up*2pcs)
3.
and M4*25(down*2pcs) fixed.
Fasten the 4 provided screws (screw size B4x14) to secure the stand to the TV according
4.
to the diagram.
screw size M4 * 20(up)
screw size M4 * 25(down)
4
screw size
B4x14

Wall Mounting

1.
Ensure that the selected wall is made of appropriate material and can support the
weight of the TV. Make sure there are no pipes or cables inside the wall on your
chosen position.
2.
Obtain a suitable wall mounting bracket and mounting eyebolts (thread size M6x10)
and screws from your local hardware store.
3.
Place the unit face down on a soft surface.
4.
Remove the attached leg at the bottom of the TV by removing the 4 screws on the
leg cover.
5.
Refit the cover securely by replacing the 4 screws into their original positions.
6.
Fasten 4 eyebolts
diagram.
7.
Fasten the wall mounting bracket using screws onto the wall.
8.
Connect the eyebolts and the wall bracket securely with strong rope
9.
Carefully check that all fastenings are secure before releasing the TV.
100mm
Thread hole size M6 x 10 depth (TV Mounting Screw Size) on the TV.
panel according to the
200mm
100mm
200mm