Connect a 3.5mm headphone for personal audio.
PC Audio In: Use to obtain sound when a PC is connected
to the PC input.
Use 3.5mm stereo mini-pin cable to connect
PC to TV.
TV: Connect to receive the signal from your antenna or cable via coaxial cable.
VGA: Connect your computer
or other device with a VGA output to this jack using a 15-pin, D-sub cable.
In: Connect an AV device that has composite
video jacks, such as a VCR
or a DVD player. To access device connected
to these jacks, press the INPUT button on your
remote; then press the up/down
arrow to select AV. Press the ENTER button at last to confirm.
L: Left audio channel connection.
The left audio connector
is usually white. For mono audio
sources, be sure to use the left AUDIO INPUT.
R: Right audio channel connection.
The right audio connector
is usually red.
The AV input (Video In), Component
Znput _, Pb, Pr) share the same audio Znput jacks-AUD/O
Connect a device that has component
video jacks, such as a DVD player.
To access device connected
to the Y/Pb/Pr jack, press the INPUT button on your remote; then press the up/down
Press the ENTER button at last to confirm.
They provide good picture quality because the video signal is separated
Use three video-grade
video cables for the connection.
When using Y/Pb/Pr,
make sure you
connect left and right audio cables to the Audio L and Audio R jacks.
Multimedia Interface) It provides an uncompressed
that carries both video and audio data
by way of an integrated
USB: Connect your USB storage device to enjoy music/photo
files on your TV. (Also used for service purpose)
Connect the AC power cord (supplied).