Table of Contents
Advertisement
Time did not adjust for daylight-saving
time
Check to make sure daylight-saving
feature is set correctly.
VCR makes
noise when stopped
VCR is removing
tape from heads. This is normal. The head cylinder
inside the VCR will continue
to rotate for a few
minutes after you put the VCR in the stop mode.
Will not AUTO
CHANNEL
SEARCH
active
channels
correctly
Check to make sure the antenna connections
are secure and correct.
Check to make sure the Signal Type: CABLE/ANTEN
NA feature
is set correctly.
If Detect Automatically
was selected for the Signal Type in the AUTO CHANNEL SEARCH menu, try using either
CABLE TV or ANTENNA
instead.
May not be necessary
if using a cable box for all channels.
Contact your local cable company
for more information.
Tape plays back in slow motion
Press PLAY to return to normal
playback.
Cannot
select
channels
over 69
Cable channels over 69 can only be selected
if Signal Type: CABLE/ANTENNA
feature is set to CABLE.
Cassette
with safety
tab removed
does not start to play automatically
Check to make sure the Auto Play ON/OFF feature is set to ON.
TIMER
indicator
flashes
Check to make sure there is a cassette in the VCR when a timer recording
is set.
Time
counter
disappears
during
searching
This is normal.
On-screen
menus appear
in English,
French,
or Spanish
Check LANGUAGE
feature.
No stereo sound during
playback
Check to make sure theTape
Playback feature
is set to HI-FI to hear stereo sound during
playback. The tape you are
playing
must be recorded
in HI-FI in order to play back in HI-FI.
Must use the AUDIO/VIDEO
jacks on the back of the VCR to hear stereo sound.
Stereo
audio too noisy
Stereo signal is weak. Set Reception:
STEREO/SAP/MONO
feature to MONO.
Press one of the TRACKING
up or clown buttons
to minimize
the noise.
55
Advertisement
Table of Contents
