Table of Contents
Advertisement
About
Programming
the Remote
The remote can be programmed
to control other brands of
remote-controllable
TVs. It is already programmed
to operate
most GE, RCA and ProScan TVs.
Programming
the Remote
to Control
a TV
If the TV does not turn on when you press the TV button, the
remote needs to be programmed.
Follow these steps to program
the remote to control your
particular
TV:
1.
Turn on theTV.
2.
Find your TV brand and code number(s)
on the code list on
the next page.
3.
Press and hold the TV button on the remote.
4.
Enter the two-digit
code from the code list.
5.
ReleaseTV, and then press CHAN up or down. If theTV
responds to the remote commands,
the remote is
programmed.
6.
If the TV does not respond, repeat these steps using the next
code in the list.
Operate
the TV
After you set up the remote,
see which buttons operate yourTV.
1.
Point the remote at theTV, and press theTV button.
If the TV does not turn on, press the TV button and then
press the OFF button.
2.
You may want to experiment
to see which buttons operate
yourTV.Try
pressing
buttons,
such as VOL and MUTE. See
"TV Function
Buttons"
in the VCR Basic section for details,
This remote may not operate all
models of the brands that are shown.
Note the difference between the TV
and VCR on-screen displays to see
which one the remote is operating,
32
Advertisement
Table of Contents
