Table of Contents
Advertisement
Co n nectio ns
Setup
_._ Arrows
OK
button
How to Use the Remote Control to Complete
the Initial Setup
The technical
term is "Navigation"-
how you move through
the on-screen menus. The method is the same throughout
the menu screens: highlight
your choice and select it.
To highlight
a menu item, press the arrow buttons on the
remote to highlight
one of the items listed on the screen. Use
the up or down arrow button
to move up or down. Use the
right or left arrow button
to move right or left.
To select the item that you've highlighted,
press OK.
Note:Highlighted means that the menu itemstands out from other
menu itemson the/;st (appearsdarker,brighter, or o different color]
Turn on the TV
Press]V on the remote, or pressPOWERon the ]V's front
panel.
Note:Pressingt#e W button not only t_rns on the W_but puts the
remot_ into Wmode. "W mode" means that the buttons on the
remot_ control operate the TV'sfunctions
Complete the Initial Setup
The menu system in your ]V allows the IV's features to work
properly. The first time you turn on your lV, the SETUPscreen
appears with Language highlighted.
The default language is
English. To choose another language, press the right arrow
button on the remote.
Complete Auto Channel Search
This part of the setup allows the lV to search for all channels
viewable through your antenna or cable IV system. This is
sometimes called auto programming.
1. Highlight Auto Ch. Search and press OK.
2. The Signal Type option is set to Cable To change the
option to Antenna, press the right arrow button and then
pressOK.
3.
Press the down arrow button
to highlight
StarL Press OK
to begin the auto channel search.
Once the search is complete, you can begin watching
]V. For
information
on customizing
your channels or menu options,
go to Chapter 4.
8
Graphics contained
within this publication
are for representation
onlg
Chapter 1
Advertisement
Table of Contents
