Table of Contents
Advertisement
Connections
Setup
button
How to Use the Remote Control to Complete
the Initial Setup
The technical
term is "Navigation"-
how you move through
the on-screen menus. The method is the same throughout
the menu screens: highlight your choice and select it.
To highlight
a menu item, press the arrow buttons on the
remote to highlight
one of the items listed on the screen. Use
the up or down arrow button to move up or down. Use the
right or left arrow button to move right or left.
To select the item that you've highlighted,
press OK.
Note: Highlighted means that the menu item stands out from other
menu items on the list (appearsdarker,brighter, or a different color]
Turn on the TV
Press IV on the remote, or press POWER on the Iv's front
panel.
Note: Pressingthe W button not only turns on the _, but puts the
remote into Wmode. "TVmode"means that the buttons on the
remote con trol operate the 1V'sfunction&
Complete the Initial Setup
The menu system in your 1V allows the IV's features to work
properly. The first time you turn on your IV, the 5ETUPsereen
appears with Language highlighted. The default language is
English. Tochoose another language, pressthe right arrow
button on the remote.
Complete
Auto Channel
Search
This part of the setup allows the IV to search for all channels
viewable through your antenna or cable IV system. This is
sometimes called auto programming.
1. Highlight
Auto Ch. Search and press OK.
2. The Signal Type option is set to Cable. To change the
option to Antenna,
press the right arrow button
and then
press OK.
3.
Press the down arrow button
to highlight
Start. Press OK
to begin the auto channel search.
Once the search is complete,
you can begin watching
IV. For
information
on customizing
your channels or menu options,
go to Chapter 4.
8
Graphics contained
within this publication
are for representation
only,
Chapter I
Advertisement
Table of Contents
