Table of Contents
Advertisement
References
Trouble Checks
You may have problems
that can be fixed with a few minor adjustments.
Look for the type of problem
you are having below and then try the
suggestions
to get your TV going again.
For warranty information see page 32.
Trouble
Checks
and Adjustments
Power
TV will not turn on
No picture, no sound but
TV has power
Picture
Blank screen or Unusable
Signal appears on screen
Plug TV in.
Plug something
else into the outlet to make sure it is working.
Make sure batteries
in the remote are not dead.
Aim the remote at the TV and press TV.
Make sure batteries
are placed
in the remote the right way. See batteries
on page 2.
Unplug
TV for a few minutes
and then turn it on again.
Check antenfia connections.
Check position
of Cable/Air
feature. See page 27.
Try another
channel.
Inactive channel
may be tuned.
Make sure component
connected
to the VIDEO INPUT jacks is turned
on
if you choose channel 00.
Make sure TV is tuned to the same channel as the switch on back of VCR.
if watching
a VCR.
Make sure TV/VCR button
on VCR is in correct position when using VCR.
Try another
channel.
Scan the channels.
Picture poor, sound okay
• Check antenna connections:
Adjust TV picture.
See pages 16-17.
Picture-in-Picture
Can't get two different
channels in picture-in-picture
Make sure small picture is tuned to channel 00.
Make sure the component
connected
to the back of the T¥ is turned
on.
Make sure the AUDIO and VIDEO OUT jacks on the VCR, Laserdisc
player, or Camcorder
are connected
to the TV's VIDEO and AUDIO IN
jacks.
Make sure VCR 1 Channel
is set to Disabled.
See page 9.
3O
Advertisement
Table of Contents
