Table of Contents
Advertisement
Using
the
Romote
Control
The component
button
corresponding
to the mode you're
in flickers when the
remote
batteries are low and you press a
button
on the remote.
A warning
message may also appear on
the screen when you press a remote
button
and the batteries
are love
INIFO
In "IV mode, makes the channel banner appear and disappear.
In DVD
mode, makes the int_ banner appear and disappea1:
INPUT
Accesses the available video input channels
(VID1, VID2, FRNT, CMP1,
CMP2 and DVI). Press the CH+ or CH- bullon to resume TV viewing.
LIGHT
Press to illuminate
tile mmolc control's buttons (except for tile component
bultons). To conserve battery power, the light turns off at'ter several seconds.
Backlight won't activate if batteries are low, but blinks on and off quickly.
MENU
In "IV mode, makes the "IV Main menu appear and disappear.
In DVD
mode, makes the reduced TV menu appear and disappear.
MUTE
Reduces the TV's volume to its minimum
level. Press again to restore the
Tip
volume.
To turn offmost RCA,GE,and Proscan
OK
When in the menu system, selects highlighted
items. When watching TV,
components that are connected to the TV,
freezes the picture until you press any button on the remote to resume normal TV
press ON*OFFtwice within two seconds,
viewing. Please note that when you "unfreeze" you go back to live programming
Thisfeature only works with most RCA,GE,
(skipping
any programming
that occmxed during the freeze).
and Proscan
products.
ON°OFF
When in TV mode, turns the "IV on and oil'. If in another component
mode (VCR, DVD, SAT/CAB, AUX/HD or AUDIO) and programmed,
turns the
component
on and off.
Note:
The DVD, VCR, SATICAB, AUXIHD, and
AUDIO buttons
also turn on most RCA, GE,
and Proscan products.
PIP
Press once to bring up the small picture-in-picture
(PIP) window.
Press again
to bring up the picture-outside-picture
(POP) windows.
Press to remove POP. (See
Chapter 4 tBr more intkmnation
about using PIP.)
PIP + or PIP-
When using PIP or POP, changes the channel in the PIP window.
PRESETS
In "IV mode, displays the Picture and Sound preset seltings. Use the up
and down a_ow
butlons to highlight either Picture or Sound sethngs. Use the left
and right mxow buttons to change to a different Picture or Sound preset. In DVD
mode while a disc is playing, displays the DVD Int_ Display with the Audio icon
highlighted.
REC
If programmed,
stmls recording
TV programs
if your TV/1)VD is connected
to a recording
device (such as a VCR) if the remote is in the right mode to control
that device.
REV, PLAY, FWD, STOP, PAUSE
In DVD mode, these butlons provide mvei:se, play,
last tBrward, stop and pause the disc. If programmed,
they also provide transport
control for some remote-controllable
VCRs, DVD players, "tapedecks, and CD players.
SAT/CAB
Puts the remote in SAT/CAB mode and, if Autotuning
is enabled,
turns
on the "IV and tunes to the correct input channel.
SKIP
In TV mode, press once before changing
channels
and the TV will wait 30
seconds
before returning you to the original channel.
Press repeatedly
to add more
time.
SLEEP
Brings up the Sleep timer menu. Use the right and left arrow buttons
on the remote control to increase
or decrease
the sleep timer in five minutes
increments
(up to a maximmn
of four horn:s).
SWAP
When using PIR swaps the main picture with the PIP window.
When using
POP, swaps the let't and right pictures.
TV
Turns on the "IV and puts the remote in TV mode. Also displays the charmel
banne_:
VCR
Puts the remote in VCR mode and, if Autotuning
is enabled,
turns on the TV
and tunes to the correct input channel.
VOL- or VOL +
Decreases
or increases the TV's volmne.
ZOOM
In PIP mode,
changes
the size of the PIP window.
Chapter
2
Graphics contained
within tbis publication
are fi)r representation
on(l_.
1]
Advertisement
Table of Contents
