Table of Contents
Advertisement
INTERACTIVE
SETUP
If you self-installed your satellite dish antenna, you may have
already used the interactive setup to find the dish pointing
coordinates, acquire and fine-tune the signal, and run a system
test.
If you need to run the interactive setup again, select Options
from the Main menu, then select Interactive Setup.
If you just want to check your dish pointing coordinates, or run
the signal strength
meter, select Dish Pointing from the Main
menu.
ORDERING
DSS® PROGRAMMING
After you have installed your system, you should contact the
service providers, DIRECTV and USSB to receive DSS®
programmir_g.
Programming with DIRECTV:
Call 1-800-347-3288
Programming with USSB:
Call 1-800-204-USSB
When you order programming,
you need to know your Access
Card number.
To get the number,
select Options from the Main
menu, then System Options,
and
then select System Test.
Wait for the system to run all of
it's tests. The Access Card number
is displayed
at the end of the
system test.
Write the Access Card number
in
the space below
for easy
reference:
Advertisement
Table of Contents
