Table of Contents
Advertisement
The VCR will only respond to the compatible
remote's VCR2,
VCR2-LD, or VCR2.DVD button.
If you change the remote
setting to VCR2, the remote that came with your VCR will no
longer control
it.
Use the compatible
remote to change the remote setting back
to VCR1. Display the PREFERENCESmenu, press 1, and then press
VCR on the VCR°s remote.
AUTO
PLAY
This feature allows the VCR to automatically start playing when
you insert a tape with the safety tab removed.
Press 2 to switch
between
ON or OFF.
Select ON if you want a tape with its safety tab removed to
start playing automatically
when the tape is inserted.
Select OFF if you do not want a tape with its safety tab
removed to start playing automatically.
AUTO
TV/VCR
This feature controls whether the TVNCR switch changes
automatically to the VCR mode, when the VCR is turnea on.
Press3 to switch between ON and OFF.
Select ON if you want the VCR to switch to the VCR mode
when the VCR is turned on or a cassette is inserted. This only
applies if you connect the IN FROM ANT and OUT TO TV
jacks of your VCR and TV and watch your VCR on channel 3
or 4 of your T_.
Select OFF if you want the VCR to remain in the TV mode.
This is useful if you watch your VCR on the TV's video input
and you don't want your antenna/cable signal interrupted
by the VCR.
Auto
TV/VCR
19
Advertisement
Table of Contents
