Advertisement
• The digital remote
control that came packed with
your VCR controls your VCR and a compatible
RCA
or Sears television.
• To control a compatible
Sears TV, first program the
remote
as described below. The buttons shown on
page 15C will then control the TV whenever you press
the TV button.
• Whenever
you install
or replace
batteries
in the
remote,
it will automatically
reset
to control
a
compatible
RCA
television.
So, if you
have
a
compatible
RCA TV, you can skip the programming
steps below.
-Programming
Remote to Control TV
• Because the remote control is designed to operate
five different types of TV's, you must first program
the remote to match the remote system in your TV.
• You can easily do this by slowly pressing number
buttons
1 thru 5 (one at a time) while holding the
TV button.
• When
the "IV starts
changing
channels,
you'll
know you've pressed the right button combination.
To program
the remote, follow these steps:
1. Point remote toward front of TV.
2. While holding
the TV button,
press number
buttons
1 thru 5 (one at a time). The TV will
change channels
when the matching
number
button is pressed.
TVand
1
TV and 2
TVand
3
TV and 4
TVand
5
RCA Models
Selected Sears Models
Selected Sears Models
Selected Sears Models
Selected Sears Models
3. Release
both
buttons
when
the
TV
starts
changing channels.
The other remote buttons
shown on page 15C will now control your TV.
Notes: You will only have to program your remote to
match
your TV once. It will remember
what code
matches
your TV until you replace the batteries.
15B
Advertisement
