Table of Contents
Advertisement
Playing
DVDs
To Load and Play a Disc
To put tile TV/I)VI) in I)V1) mode and play a disc, press the, I)V1) button on the remote control.
This is an example
of a one-sided
disc.
This is an example
of a 2_sided disc.
The title is in the
center.
1.
Press tile OPEN*CLOSE butlon on tile t_ont of the TV/DVD. The disc
tray opens.
2.
Place a disc gently into tile tray with the disc's label tacing up
(double-sided
discs have content on both sides, so you can place
either side up).
3.
Press tile OPEN*CLOSE or PLAY button. The disc lray closes.
The TV/DVD reads the disc's table of contents,
and then one of
three things happens
depending
on how the disc was programmed:
• The disc starts playing.
• The disc menu appears on tile screen. One of the options will
start disc play. Highlight that option and press OK on the remote.
• The DVD's main menu appears
on tile screen. Highlight tile Play
option and press OK on the remote.
When you stop playing a disc, file unit remembers
where you stopped.
When you start playing tile disc again, the unit picks up where you left
off unless the disc is removed,
the unit is unplugged,
or you pressed tile
STOP button twice.
Using a Disc Menu
A disc is capable of having an on-screen
menu that is separate
from the DVD's menu system and
on-screen
Intk) Display. "Filedisc menu might only contain a list of the titles and chapters,
or it
may allow you to change t_atures such as language
and playback
settings.
Although the content
and operation
of disc menus vary l)com disc to disc, tile tk>llowing example
will give you an idea of what to expect.
ri0
Many discs skip the disc
menu and start playing
automatically. To accessthe
disc menu when you're
playing a disc, press MENU
on the reroo te.
i.
While tile disc is playing, press file MEN{)
button on the retools.. The disc menu
appears.
An example of a disc menu. The
menus on discs vary because the disc
menu is created by the disc's author.
27
Advertisement
Table of Contents
