Table of Contents
Advertisement
THE
BASIC CONNECTION
The basic connection
below (TV and VCR) is the most common
connection
and is therefore
used to illustrate
a single component
connection
with your I'M For better sound and picture quality
and
multiple
component
connection
information
refer to the next section,
Advanced
Connections.
Cables
You will use the following
cable to make your
connection:
Coaxial
Cables: These cables carry both the audio
and video signal to the TV from an antenna, cable,
or cable box. In this connection, a second Coaxial Cable carries the signal
through the VCR to the TV.
CABLE,
CABLE BOX, OR ANTENNA
VCR 1
I
OUT
VIDEO
AUDIO
TV
%
IN FROM ANT CH3
°"'°l
e
!
How to View the
VCR
To watch the VCR in this connection
tune TV to
Channel 3 or 4.
Later, in the Interactive
Setup section you will
program the TV to automatically
tune to Channel 3 or
4 when you turn on the VCR.
Once you have completed
this connection
go to "Step 3:
Connecting
the IR Controller"
on page 9.
5
Advertisement
Table of Contents
