Table of Contents
Advertisement
CLEAR Removes any menu or display from the screen and returns you
to TV viewing. Will also exit the Guide system.
(0-9) Number
Buttons
Enters channel numbers and time settings
directly though
the remote control. To enter a two-digit
channel, press
the two digits. To enter a three-digit
channel, press and hold the first
digit until #-- appears, then add the second two. Example: to tune to
channel 123, press and hold 1 until 1-- appears then press 2 and 3.
WHO,INPUT
in TV mode, press to toggle through
the available
input
sources VlD1/SVID1, VlD2/SVID2, previous channel and FRNT(front panel
jacks). In SAT mode, press to select available channel lists.
ANTENNA
Functions as TV/VCR button
in VCR mode and TV/receiver
button in SATeCABLE mode.
REVERSE, PLAY, FORWARD,
RECORD, STOP, PAUSE If programmed,
provides transport
control for some remote-controllable
VCRs, DVD
players, laserdisc players, tape decks, and CD players. Pressing RECORD
when using the GUIDE Plus+ Gold system sets the VCR to record a
program.
PiP Brings up the small picture-in-picture
window.
Pressagain to
remove the PIP window. When PIP Caption Display - Alternate
with PIP -
has been selected, will display captioning in the PIP window.
SWAP Swaps the main picture with the PIP window.
CH CTRL
Selects the picture window,
(that is, the main or PIP window)
to be changed by the CH ^ (channel up) or CH v (channel down) buttons.
RESET Resets picture quality
controls to the Bright Lighting
Picture
Control Preset. Point and select to choose a different Picture Control
Preset.
ACCESSING
THE
VIDEO
INPUT
Use the WHO,INPUT
button
to scroll through
the available
input
channels and view components
you have connected
to the TV.
I.
Press TV to place the remote in TV mode. Make sure that the
component you want to view is turned
ON.
2.
Press WHO,INPUT
to tune to an available
input channel.
3.
Continue
to press the WHO°INPUT button
to scroll through
the
channels.
Modes of Operation
|
J
Because this universal remote can control
several different components (DVD
player, VCR, Cable Box, etc.) it uses
operational modes triggered by the
component buttons. For example if you
want the remote to control the TV, you
would press the TV button to put the
remote into TV mode before you could
control the TV.
23
Advertisement
Table of Contents
