Table of Contents
Advertisement
STEP 4: PLUG IN THE TV
Plug the end into the wall outlet, matching
the wide blade of the plug
with the wide slot in the outlet. Be sure to insert the plug completely.
STEP 5: PLACE BATTERIES
IN REMOTE
Remove the battery
compartment
cover from the back of the
remote.
Insert fresh batteries.
Make sure that the polarities
(+ and -) are
aligned correctly.
Replace the cover.
STEP 6: TURN
ON THE TV
Press TV on the remote,
or press POWER on the TV itself.
Pressing the TV button
not only turns on the TV, but puts the remote
into TV mode, so that the buttons on the remote will control TV
functions.
ON-SCREEN
PROGRAM
GUIDE
The TV is designed
to bring up the GUIDE Plus+ Gold on-screen
program
guide when you use the TV button
on the remote to turn on the TV
(after you have set up the GUIDE Plus+ Gold system). For more
information,
see "GUIDE Plus+ Gold System" on page 44.
To get out of the Guide:
•
Press OK to exit the Guide and tune to the highlighted
channel.
•
Press GUIDE to exit the Guide and tune to the channel displayed in
theView
window•
•
Press CLEAR to exit the Guide and go to the last channel you were
watching.
DVD
VCR2
AUX SAT.CABLE
&&°&&
MUTE
S_P
SOUND
_
BACK
MENU
_LE_t
mTv
STEP 7: PROGRAM
THE TV
Proceed to the next section, Interactive
Setup. The interactive
setup
routine
walks you through
the steps needed to fully configure
the TV.
The first steps ask you to select your preferred
language
for the menu
system and to begin the auto channel search, which
puts available
cable
TV or antenna signals into the TV's memory.
Projection TV Only.
If the picture appears to have a double or
triple image or if you notice rings or halos
around objects, you may have to adjust the
color convergence.
Details can be found
under the Screen menu heading in the
Features and Menus section of this manual
10
Advertisement
Table of Contents
