Table of Contents
Advertisement
SE'n'ING
THE TIME
The next step in the Interactive
Setup lets you set the time of day. If your
GUIDE Plus+ G01d system has not completed
its first download,
you need
to set the time.
Once the system has completed its first download,
it sets the time for
you automatically
and you may not see this screen.
1. Press MENU or OK to bring up the SET TIME control
panel.
2,
Use the left and right arrows to point to the hour and minutes
spaces• Use the digits to enter the numbers and the up and down
arrows to change from AM to PM.
3•
Press MENU or OK to continue.
SETTING
THE
VCR1 CHANNEL
(AUTO
TUNING)
The next step lets you set the VCR1 channel. When you set the VCR1
channel, you're telling
the TV what channel to tune to when you press
the VCR1 button
on the remote.
This is called auto tuning.
Indicate which input you used to connect the VCR. If you don't have a
VCR1 component
connected
to the TV, skip this step or select Not
Connected from the VCR1 Channel choice list. (For more, see Auto
Tuning
in the Features and Menus section.)
16
Advertisement
Table of Contents
