Table of Contents
Advertisement
To restore all settings to the factory settings:
1.
Press MENU and scroll down to RESET
2.
Press MENU to select
Note: this action will not reset channel(s)
that have been scanned
in or removed.
To do this you must rescan all channels
as
described
above.
The switch from TV to AV, PC, S-VIDEO OR YPBPR:
1.
Press INPUT on the remote control repeatedly
until the desired MODE is on the screen.
2.
All MENUs must be closed before doing this.
YPBPR
8_VIDEO
_TV
To enter the audio visual mode:
1.
Press the INPUT button until "AV" (for connection
with RGB cables)
or "S-VIDEO"
(for connection
with S-Video cable)
appears
in the top right of the screen.
2.
If you do not have an AV device
connected,
such as a DVD player,
a blank
screen
will appear
with a box containing
the
words
"NO SYNC".
If this is the case ensure
that your AV device
is powered
on and is plugged
correctly
into the sockets
on the rear panel of your LCD TV/Monitor.
2O
Advertisement
Table of Contents
