Table of Contents
Advertisement
Whenever
AUTO SEARCH
for TV channel
is performed,
tuned TV channel
or programs
are stored in sequential
order as channel
0, 1,2, etc.
To set a particular
TV channel
to specific channel
number, follow the steps below:
1.
2.
3.
4.
5.
6.
7.
8.
Press the MENU key on the remote control to display the TV menu.
Press the DOWN arrow key one time to highlight
TV SETTING
then press the MENU button to select.
Press the UP or DOWN arrow key to highlight
SWAP and press MENU to confirm selection.
Under
"CHANNEL",
use the left and right arrow keys to select channel
to be swapped.
Use the up or down arrow keys to highlight
"TO" and press the right arrow key to confirm selection.
Use the left or right arrow keys to select the channel
number to be swapped
and press MENU key to confirm
channel
swap.
Repeat
step 4 to 6 for another channel
swap.
Press EXIT key four times to exit the TV menu upon completion
of channel
swap..
Note: Channel
mapping
(frequency)
table can be found at the end of this manual
if needed.
15
Advertisement
Table of Contents
