Table of Contents
Advertisement
Trouble Checks
Trouble
Checks
and Adjustments
Picture-in-Picture
(not on all TV models)
No Picture
For connections
1A, 2A, and 3A:
Picture-in-Picture
is not possible
with
these
connections.
For connections
2B and 2C:
Picture-in-Picture
is possible
with these connections
when playing a tape
in the VCR.
1. Turn on TV, then turn on cable box to desired channel.
2. Insert tape in VCR and press; PLAY.
3. Press the TV/VCR button
to return
to TV control.
4. Turn on Picture-in-Picture
feature.
5. Tune TV to channel
00.
For all other connections:
1. Make sure a component
such as a VCR or camcorder
is connected
to
the TV's AUDIO and VIDEO IN jacks.
2. Turn on TV to watch one picture through
the GABLE/ANTENNA
connector.
3. Turn on component
connected
to AUDIO IN and VIDEO I!Njacks.
4. Tune TV to channel
00 to see the other picture.
For S-Video connection:
Be sure to connect the regular VIDEO cable for picture-in-picture
when
you have an S-VHS component
connected
to the TV with an S-VHS
cable.
The S-VIDEO signal cannot be used for picture-in-picture.
27
Advertisement
Table of Contents
