RCA G27692 Connection Manual page 28

Trouble Checks
"[rouble
_Satellite Receiver
No picture
Checks and Adjustments
For connections 4A, 4B, 5A, 5B:
1. Make sure satellite receiver is turned on and tuned to an active
channel.
2. Select channel 00 on the TV.
For connections 4C, .5C:
1. Turn on TV and tune it to channel 00.
2. Turn on satellite receiver.
3. Turn on VCR and set it to line mode (see glossary).
4. Select desired channel with CHANNEL buttons on satellite receiver.
Cable Box
No Picture
For connections 2A, 4A:
1. Turn on cable box and tune to an active channel.
2. Tune TV to output channel (usually 02, 03, or 04) of cable box.
3. Select desired channel with CHANNEL buttons on the cable box.
For connections 2B, 2C, 3B, 3C:
1. Turn On cable box and tune to an active channel.
2. Tune the TV to the output channel (usually 02, 03, or 04) of the cable
box with VCR turned off. With VCR turned on, tune VCR 1:ooutput
channel of cable box and select channel 00 on the TV.
3. Select desired channel with CHANNEL buttons on the cable box.
For connection 3A:
1. Turn on cable box and tune to a premium channel.
2. Tune the TV to the output channel of cable box.
3. Place A-B switch in the B position to watch premium channels.
4. Place A-B switch in the A position to watch other channels when cable
box is not needed.
For connection 4B:
1. Turn off satellite receiver or press [RD/'I'V switch on satellite receiver.
2. Turn off VCR, or press TV/VCR button on VCR.
For connection 4C:
1. Turn off VCR, or press TVNCR button on VCR.
26