Table of Contents
Advertisement
Go-To Search
The Go-To search feature enables the VCR to quickly
locate a
counter reading anywhere
on the tape. When the VCR locates
the counter reading,
it will begin playback.
1.
Press STOP.
,
,
Press SEARCH on the remote until the GO-TO SEARCH
menu appears on the screen.
Press number
buttons
to enter
the hour(s)
and/or
minutes
of
the counter
reading
you want
the VCR to "go to".
Press
CLEAR on the remote
to correct
an entry.
4.
Press FWD to search forward
or REV to search in reverse.
5.
Press STOP to stop Go-To searching.
GO-TO
SEARCH
Current
tape
counter
2:17:25
Press
REV
or
FWD
to
go
to
-:--:00
Press
SEARCH
to
exit.
is
Pro-Tect
Plus
TM
Locking
Feature
To disable the usage of the VCR, or to protect your timer
recordings,
you can lock the VCR so that the buttons on the VCR
or remote won't work.
•
To Lock:
Press and hold the remote's
POWER
button
for
approximately
six seconds.
The front
panel
POWER
indicator
lights
when
the feature
is activated.
•
To unlock
the feature
and turn on theVCR:
Press and hold
the remote's
POWER
button
for approximately
six seconds.
Locking
Your VCR:
If a timer recording is programmed,
make sure your VCR is turned off.
Locking your VCR prevents the VCR
from being accidentally turned on,
28
Advertisement
Table of Contents
