Remote Buttons - GE VG2044 User Manual

Remote Buttons
CHANNEL v or A Selects next higher or lower channel in the
VCR's channel memory.
CLEAR Resets time counter to 0:00:00. Allows you to change
entries when setting the clock or a timer recording.
F.ADV Lets you view one frame with each press of the button
when tape is in pause.
FWD Fast forwards the tape when the VCR is stopped.
Searches forward through a tape during playback. Starts slow
motion during play-pause and increases slow-motion speed.
GO BACK Switches between two channels. Select one channel
and then select another using the number buttons. Press GO
BACK to switch between the two channels.
INFO Shows the status displays on the TV screen.
INPUT Selects between the line input and theVCR's tuner. Line
input refers to the signal coming from the component connected
to the AUDIO/VIDEO IN jacks on the VCR.
MENU Brings up VCR MAIN MENU on the TV screen.
Numbers (O through 9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 - - appears on the screen. Then press the other
two numbers.
POWER Turns the VCR on and off.
PAUSE Pauses playback or recording. Press PAUSE again to
return to playback or recording.
PLAY Plays a tape.
REC Starts VCR recording. Also used for express recording.
REV Rewinds the tape when the VCR is stopped. Searches
backward through a tape during playback. Starts slow motion
during play-pause and decreases slow-motion speed.
SEARCH Displays Index and Go-To Search menus onTV
screen when VCR is stopped. Advances the tape 30 seconds of
recorded material during playback. Each press advances the
tape an additional 30 seconds up to five minutes.
SLOW Used for slow-motion playback.
SPEED Selects a recording speed (SP or SLP).
TV.VCR POWER
o ©
PLAY
REC STOP PAUSE
INPUT INFO SPEED
©©O
40 °O
'O'O °0
GO BACK
©°0 &
CLEAR MENU CHANNEL
S_H 7_ RAC KO,.I-
F.ADV SLOW
© ©
16