Table of Contents
Advertisement
Index
Search
The VCR has a "VHS Index Search System"
that automatically
records an index mark on the tape every time you start a
recording.
During playback you can locate the program
you want to play
by the number
of index marks or by scanning.
The VCR will
search forward
or reverse from the location you are on the tape.
To Search:
1.
Press STOP.
2.
Press SEARCH on the remote to display the iNDEX SEARCH
on-screen display.
3.
If you want to search through
a certain number of index
marks, press two number buttons to enter the number of
marks you want to search. Press CLEAR on the remote to
correct an entry.
4.
Press FWD to search forward
or REV to search in reverse.
The VCR will locate your index mark and begin playback. If
you did not enter a specific index number, the VCR will
locate the next index mark and begin playback.
5.
Press STOP to end index searching.
Some index marks may be missed by the VCR:
A mark too close to your location on the tape
The mark at the beginning
of a recorded segment
of five
minutes
or less
The first index mark on the tape when you start at the
beginning
of the tape.
Go-To Search
The Go-To search feature enables the VCR to quickly locate a
counter
reading anywhere
on the tape. When the VCR locates
the counter reading,
it will begin playback.
1.
Press STOP.
2.
Press SEARCH on the remote until the GO-TO SEARCH
menu appears on the screen.
3.
Press number buttons to enter the hour(s) and/or minutes
of
the counter reading you want the VCR to "go to." Press
CLEAR on the remote to correct an entry.
INDEX
SEARCH
Press
REV
OR
FWD
to
begin
scanning
OR
enter
a
specific
index
number
Press
SEARCH
to
exit
INDEX
SEARCH
Searching
for
index
number
12...
Press
STOP
to
cancel
INDEX
SEARCH
Searching
for
index
marks...
Press
STOP
to
cancel
33
Advertisement
Table of Contents
