Table of Contents
Advertisement
Connecting Your TV
Cable-TV
Connections
Follow one of these steps to connect a cable-TV
system to your TV instead of a home antenna,
Since cable-TV systems
vary, you may wish to consult your local cable-TV
company for additional
information.
A
FoLlow this diagram if your cable company does not require a cable box (no scrambled channels):
_-rt..,
Back
Incoming
_
_]
_
of
Cable
_
TV
B
Follow this diagram if your cable company requires a cable box that can be controlled by remote control:
ncomn°
j
Cable
of
Rememberto tune your'IV to the
TV
outputchannelof the cable box
_l
(usually2. 3. or 4) when selecting
oct
channelsvia the cable box.
CABLE IllOX
C
Follow this diagram if your cable company requires a cable box that cannot be controlled by remote control:
Incoming
Cable
®
©
Note:
These optional
accessories
(2-way
splitter(_),
A/B switch(_),
and three coaxial
cables (.c)) are available as a kit under
#AHO41B L.*
®
bek
of
The "A" position on the A/B switch lets you select all
non-scrambled channels by the TV's remote.
The "B" position allows you to select scrambled channels
via the cable box. Remember to tune your TV to the
output channel of the cable box (usually 2, 3. or 4)
when selecting channels via the cable box.
* Optional accessories are available from most dealers or electronics supply stores.
18
Advertisement
Table of Contents
