Table of Contents
Advertisement
Operating
Features
"
FM Radio Operation
'The FM radio is designed
to work
on either cable-TV
or a home
antenna.
If your TV is connected
to
cable-TV, the radio will only work
if your cable company
broadcasts
the FM.radio signals.
If your TV is
connected
to a home antenna
system, you will be able to receive
those channels
broadcast
in your
area.
The radio can be used along with
the sleep timer and alarm timer.
Listen to music before going to
sleep or wake up to music.
Details
.for "Setting the Sleep Timer" are
on page 12 and "Setthzg the
Alarm"
are on page 13.
Operating
the Radio
+
Turn on the TV and press FM/TV
on the remote or FM on the front
of the TV. The radio display
appears on the TV screen.
You can also access the radio
through the main menu. Press
MENU until FM RADIO is
highlighted.
Programming
Radio Stations
into Memory
.
.
Select the radio station you want
to put into memory by pressing
CHANNEL up or down. If the
station cannot be locked in when
you press the CHANNEL buttons,
you can select FM MANUAL
fr3m the radio menu. Pressing +
or- will step through each
frequency one at a time.
When the station you want to
program appears on the TV
screen, first press number 0 to
highlight the station number, and
then press number I.
You can also program
up to six of
your favorite radio stations into
memory
so you'll be able to quickly
select them.
Number buttons
1
through 6 on the remote control can
be programmed
to automatically
select favorite channels.
Q
When TV appears in the menu,
you are in the radio mode. When
FM RADIO appears in the menu,
you are in the TV mode.
Press CHANNEL up or down to
select the next available station. If
the station you want to tune is not
strong enough for the radio to lock
in on it, you can select FM
MANUAL from the radio menu.
Pressing + or - will step through
each frequency one at a time.
3.
Press VOLUME
up or down to
adjust the volume.
The radio station is now assigned
tc number 1 and can be selected
whenever you press number 1
when the TV is in the radio
mode.
Number buttons 2, 3, 4, 5, and 6
can also be assigned to specific
radio stations. Repeat steps I
and 2 above to assign the
numbers.
Tuning the National Weather
Service (air antenna only)
The TV must be connected to an
antenna
(not cable-TV)
and the
ANT,_NNA
function
must
be set
to
AIR.
Details./'or
changing
this
./itnction are on page / 1.
NWS is located between
the highest
and lowest number on the radio
scale.
When NWS cannot be located
usin[; the CHANNEL
buttons,
use
step 12in "'Operating
the Radio'"
section.
8
Advertisement
Table of Contents
