Table of Contents
Advertisement
Reference
Trouble Checks
You may have problems that can be fixed with a few minor adjustments.
Look. for the type of problem you are having-below
and then try the ....
_
suggestions
to get your TV going again. For warranty information see page 23.
Trouble
Remote
Remote lockup
Checks
and Adjustments
Remove batteries and l_old down one or more buttons for several seconds
to drain the microprocessor
inside the remote and reset it. Re-instaU the
batteries and try remote again.
Works part or none of the
time
Clear the path between the remote and TV. of any objects.
Aim the remote at the component
you are trying to control.
Make sure batteries in the remote are not dead.
See if batteries are placed in remote correctly. See batteries, page 3.
Can't sel_ct certain channel
_ound
Noisy stereo reception
Picture okay, no sound
Press number buttons.
Channel may not be in memory.
See Autoprogram
on page 11.
Make sure TV/VCR switch on VCR is inthe TV position.
For numbers
over 100, press and hold I until 1- appears, then press the
other two numbers.
Set Cable/Air-feature
to Cable for channels
higher than 69. See page 16.
TurnStereo
off. The stereo broadcast may not be clear. See page 10.
Press VOLUME + or MUTE to restore sound.
Picture okay,sound poor
No stereo on stereo station
Try another channel. Try adjusting the Tone. See page 10.
Change Stereo to off. The stereo broadcast may not be dear. See page 10.
Make sure Stereo is turned on. See page 10.
19
Advertisement
Table of Contents
