Poulan Pro PPB1634 Instruction Manual page 8

KNOW YOUR CHAIN SAW
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of
the various controls and adjustments. Save this manual for future reference.
Chain Front Hand Guard ''-_ r'J) t_,_/- Front Handle
Adjustment Tool I II I k- Starter Roe
tBerToo,/ I\.,", / P
/_ _ k'_l _/ ON/STOP
_t _====_ _ F/_ _ _/_- Switch
Cha, '_' n Muffler
fill
' -*_IA F/IIIII "_z._"_//k"_J
Primer
Bulb
Bar Oil Fill Cap Housing Fuel Mix Fill Cap
Cylinder Cover
ThrottIe Chain
Lockout Direction
of Travel
Guide
Throttle Choke/ _ Chain Brake
Trigger Fast Idle Chain Chain Nuts Bar Sprocket Hole
Lever Brake Catcher
ON/STOP SWITCH
The ON/STOP SWITCH is used to stop the
engine.
THROTTLE TRIGGER
The THROTI-LE TRIGGER controls engine
speed.
THROTTLE LOCK-OUT
The THROTi-LE LOCK-OUT must be
pressed before you can squeeze the throttle
trigger. This feature prevents you from acci-
dentally squeezing the trigger.
CHOKE/FAST IDLE LEVER
The choke and fast idle are set by pulling the
CHOKE/FAST IDLE LEVER out to the full ex-
tent for cold starting or after refueling. The
choke provides additional fuel to the engine
during cold starting.
PRIMER BULB
The PRIMER BULB circulates fuel to the car-
buretor to provide quicker starting.
CHAIN BRAKE
The CHAIN BRAKE is a device designed to
stop the chain if kickback occurs. The chain
brake activates automatically in the event of
kickback. The chain brake activates manually
if the front hand guard is pushed forward. The
chain brake is disengaged by pulling the front
hand guard back toward the front handle as far
as possible.
CHAIN TENSION
it is normal for a new chain to stretch during the
first 15 minutes of operation. You should check
your chain tension frequently. See CHAIN
TENSION under the ASSEMBLY section.
WARNING:
Muffler is very hot dur-
ing and after use. Do not touch the muffler or
allow combustible material such as dry
grass or fuel to do so.