Product Specifications; Customer Responsibilities - Poulan Pro PP8527ESA Owner's Manual

Hide thumbs Also See for PP8527ESA:
Table of Contents

Advertisement

Donotputhands or feetnearor underrotating parts.
Keepclearofthe discharge o pening andfrontauger
areaatalltimes.
Exercise e xtreme caution when operating o norcross-
inggravel d rives, w alksorroads. S tayalertforhidden
hazards
or traffic.
After striking a foreign object, stop the engine (motor),
remove wire from the spark plug, thoroughly inspect
snow thrower for any damage, and repair the damage
before restarting and operating the snow thrower.
If the unit should start to vibrate abnormally, stop the
engine (motor) and check immediately for the cause.
Vibration is generally a warning of trouble.
Stop the engine (motor) whenever you leave the oper-
ating position, before unclogging
the auger/impeller
housing or discharge
chute and when making any
repairs, adjustments, or inspections.
When cleaning, repairing, or inspecting, make certain
all controls are disengaged and the auger/impeller and
all moving parts have stopped. Disconnect the spark
plug wire and keep the wire away from the spark plug
to prevent accidental starting.
Take all possible precautions when leaving the snow
thrower unattended. Disengage the auger/impeller, stop
engine (motor), and remove key.
Do not run the engine (motor) indoors, except when
starting the engine (motor) and for transporting
the
snow thrower in or out of the building. Open the outside
doors.
WARNING:
Exhaust fumes are dan-
gerous (containing CARBON MONOX-
IDE,an ODORLESS and DEADLY GAS).
Do not clear snow across the face of slopes. Exercise
extreme caution when changing direction on slopes.
Do not attempt to clear steep slopes.
Neveroperate the snow throwerwithout
properguards,
plates or other safety protective devices in place.
Never operate the snow thrower near glass enclo-
sures, automobiles, window wells, drop-offs, and the
like without proper adjustment of the snow discharge
angle. Keep children and pets away.
Do not overload the machine capacity by attempting
to clear snow at too fast a rate.
Never operate the machine at high transport speeds
on slippery surfaces. Look behind and use care when
backing up.
Never direct discharge at bystanders or allow anyone
in front of the unit.
Disengage power to the auger/impeller
when snow
thrower is transported or not in use.
Use only attachments and accessories approved i_y
the manufacturer of the snow thrower (such as wheel
weights, counterweights, cabs, tire chains, electric start
kits, etc.).
Never operate the snow thrower without good visibility
or light. Always be sure of your footing and keep a firm
hold on the handles. Walk; never run.
Do not overreach. Keep proper footing and balance at
all times.
This snow thrower is for use on sidewalks, driveways
and other ground level surfaces.
Do not use the snow th rower on surfaces above ground
level such as roofs of residences, garages, porches or
other such structures or buildings.
MAINTENANCE
AND
STORAGE
Check shear bolts and other bolts at frequent intervals
for proper tightness to be sure the equipment is in safe
working condition.
°
Never store the snow thrower with fuel in the tank inside
a building where ignition sources are present such as
hot water and space heaters, clothes dryers, and the
like. Allow the engine (motor) to cool before storing in
any enclosure.
Always refer to operator's guide instructions
for im-
portant details if the snow thrower is to be stored for
an extended period.
Maintain or replace safety and instruction labels, as
necessary.
Run the snow thrower, with auger engaged, a few
minutes after throwing snow to clear the machine and
prevent freeze-up of the augeflimpener.
CONGRATULATIONS
on your purchase of a new snow
th rower. It has been designed, engineered and manufactured
to give best possible dependability and performance.
Should you experience
any problem you cannot easily
remedy, please contact your nearest authorized service
center. We have competent, well-trained technicians and
the proper tools to service or repair this unit.
Please read and retain this manual. The instructions will
enable you to assemble and maintain your snow thrower
properly. Always observe the "SAFETY RULES".
SERIAL NUMBER:
DATE OF PURCHASE:
THE MODELAND SERIAL NUMBERSWlLLBE
FOUND
ON A DECAL ATTACHEDTOTHE REAR OFTHE SNOW
THROWER HOUSING.
YOU SHOULD RECORD BOTH SERIAL NUMBER AND
DATE OF PURCHASE AND KEEP IN A SAFE PLACE
FOR FUTURE REFERENCE.
PRODUCT
SPECIFICATIONS
Gasoline Capacity 4.0 Quarts
and Type:
Unleaded Regular only
Oil Type
SAE 30 (above 40°F)
API-SF-SJ):
SAE 5W-30 or 10W-30 (0 ° to +40°F
SAE 0W-30 (below 0°F)
Oil Capacity:
26 Ounces
Spark Plug:
Champion RN4C (Gap: .030")
CUSTOMER
RESPONSIBILITIES
Read and observe the safety rules.
Follow a regular schedule in maintaining, caring for
and using your snow thrower.
Follow the instructions under"Maintenance"
and "Stor-
age" sections of this owner's manual.

Advertisement

Table of Contents
loading

Table of Contents