Timer; Wake-Up Timer; Buttons; Sleep Timer - RCA T25061GY User Manual

Using the TV/VCR Features
Wake-Up Timer
The timerturnstheTV/VCR on ata desired time.You can setit to
wake you up in the morning or remind you that a favorite program is
about to start.
To Set the Wake-Up Timer
1°
2.
3.
4.
PressMEN! to display theTVNCR MAIN MENU.
Press3 to. ,;)lay theTIMEmenu.
Press 3 to
Using the
number _._
• After _.
press i
• Press _
the tit
;aytheWAKE-UP TIMER menu.
,_rbuttons on theremoteenter thechannel
tet thetime, pressI forAM or 2 forPM. Example:
5, then0,then7,then2,fora time of5:07PM.
tocorrect an e_tryorpressRESET tocancel
5. Press ME:
• If set, :.
The W
]i_t to
during
6. After the _
using the "
TV/VCR';
will autorr
thetimer.
_e-uptimerwill turnon theTV/VCR everyday.
;Pindicator on thefront ofyour TV/VCR will
.the timer hasbeen set (This indicator turns off
_-upmode.)
on your TV/VCR, you can turn off the set
e's OFF button or the POWERbutton on the
t panel. If you do not turn off your TV/VCR, it
,_lyturn off after one hour.
TV/VCR MAIN MENU
Timer Rerord4ngs
Picture QuaLity
Time
TIRE
1 Set clock
2 SLeep timer
3 Wake-up timer
WAKE-UP TIMER
%:/
Channel _
Time
WAKE-UP TIMER
Channel 12
Time 05:07 AM
Press CLEAR to correct
Press RESET for --:--
Press MENU to set
To Cancel the Wake-Up Timer
FoLlow steps 1- _ve, press RESET to cancel the timer, and then
press MENU to _.
The timer is car,- ed ff MENU is pressed before step 4 above is
completed.
Sleep Timer
The sleep timer automatically turns the TV/VCR off after 30, 60, 90,
or 120 minutes.
1. Repeatedly pressSLEEP. Each press of the SLEEP button
changes the amount of lime as shown below.
SLeep Timer 0:00--
Press SLEEP AmL of Tzzne
Twioe 30 Minwms
T'_m_ 1 Hour
Four Times 90 Minutes
Five T'mtes 2 H_
Six T'umes Timer Off
2.
• If the sleep timer has already been set, the remaining time
before the TV/VCR turns off is displayed on the screen.
To cancel thesleep _er, repeatedly p ressSLEEP until 0:00is
displayed on thescreen.
You canalsosetthesleep timerfz_n theTV/VCR MAIN MENU.
• Display the TIME menu as shown above and press 2. Follow
thedirections on thescreen. Press SLEEP or CHAN ^ orv to
change the amount of time. Press MENU to exit.
11