L]Me Menu - GE 31GT720 User Manual

The choices for each screen are:
Not connected Choose this if you do not have a
component connected to an antenna or video input on the
back of the "IV, or if you don't want the "iV tQ tune to a
channel when the particular component button is pressed.
Channel 2 (SAT/Cable only) Choose this if your
component is connected to the antenna jack on the back of
the "iV, and you want the TVto tune to channel 2 when you
press the specified component button. Reminder: Make sure
the component's Ch 2/3/4 switch is set to channel 2.
Channel 3 Choose this if your component is connected to
the antenna jack on the back of the TV, and you want the TV
to tune to channel 3 when you press the specified
component button. Reminder: Make sure the component's
Ch 3/4 switch is set to channel 3.
Channel 4 Choose this if your component is connected to
the antenna jack on the back of the "iV, and you want the TV
to tune to channel 4 when you press the specified
component button. Reminder: Make sure the component's
Ch 3/4 switch is set to channel 4.
Video Input Choose this if your component is connected
to the VIDEO jack on the back of the TV and you want the "IV
to tune to VID (SVID if you used an S-Video cable) input
channel when you press the specified component button.
Video input Source Lets you select whether or not you have
used the S-Video jack to connect a component. If you are
using the S-Video jack in this way, select S-Video Input. If
not, select Video Input.
I
Other Menus
The rest of the menus---Parental
Controls, GUIDE Plus+ menu, and
Setup--are also detailed in this manua
Look for the GUIDE Plus+ setup routine
and the Setup menu in the section
Interactive Setup, Descriptions of how
to use Parental Controls and the GUIDE
Plus+ menu are in the section Features
and Controls,
Time Menu
Sleep .timer Displays a control panel that lets you select the
amount of time you want to give the TV before it shuts itself off.
Schedule Displays a control panel that lets you set up a
schedule for turning the TV on and off automatically. Make
sure to turn the schedule On. The on-screen directions guide
you through the steps needed to set the schedule.
Set Time Displays a control panel that lets you enter the
current time. The on-screen directions guide you through the
steps needed to set the time. If your GUIDE Plus+ system is set
up, it will automatically update your time and this option will not
appear.
36