Using The Remote To Select An Audio Processor - GE 31GT720 User Manual

Sound Logic
TM
Stereo Reduces the annoying blasts in
volume during commercial breaks. Eliminates the need to
constantly adjust volume control.
Second Audio Program (SAP) Plays the program's
audio in a second language, if one is available. The TV
displays the word SAP when you tune to a program that is
broadcast with SAP information. SAP audio is broadcast in
mono. SAP is also used to broadcast a program's audio with
descriptions of the video for the visually impaired.
Audio Output & Speakers Displays a choice list that lets
you turn the -rv's internal speakers on or off and set the
audio outputs to fixed-level or variable control level.
Variable Output, Speakers On This setting turn the TV's
speakers on and allows variable output from the TV's audio
output jacks.
Variable Output, Speakers Off This setting turns the
TV's speakers off and allows variable output from the TV's
audio output jacks,
Fixed Output, Speakers Off This setting turns the TV's
speakers off and allows fixed output from the TV's audio
output jacks to an external device such as a surround sound
amplifier. With Fixed Output On, the "l'V's volume control,
tone controls, and mute are disabled.
Using the Remote to Select an
Audio Processor
You can change the audio processor from the Audio menu, as
illustrated above, or by pressing the SOUND button on the
remote. To make a selection using the remote:
1. Press SOUND to display the audio processor choice list.
2. Point to and select a different audio processor or press
CLEAR to exit.
Sound
bu_on
VCR_ 0_OFF
OVD VCR_ AU× SAT,CA_
&&o&A
_UTE SKIP
SOUNb GO _K
_Ntl C_AR
,0,0'0
0,0,0
,0 '0
"b"
31