Quick Guide to Your TV
Startup
Follow the steps below to get your TV connected
and ready for watching.
lo
Set up your TV
CAUTION: If you choose not to
use the stand recommended for
your TV, take precautions that the
stand or other furniture the TV is
placed on is properly located and
of adequate size and strength to
prevent the TV from accidentally
being tipped over or pulled off.
This could cause damage to the TV
and/or personal injury.
Matching
stands were
designed
to be used with the TV models included
in this book. The recommended
stands are provided
with hardware
to
secure the TV to the stand so that it cannot be easily pulled off or tipped
over.
Stands are not available by mail order.
To locate your nearest RCA dealer
call this toll-free number:
1-800-336-1900.
TV Model
Matching Stands
PS27108
RB2710
PS31108
RB3106
2. Hook up your TV
Hook up any antennas,
cables or other equipment
to your TV before you
follow the steps below.
Details are in the Connections Guide.
3.
Plug in the TV
Plug the cord into the outlet,
matching the wide and the small
end of the plug with the outlet.
4.
Put Batteries
in the Remote
A. Pull off the cover of the battery
compartment.
B. Place the four AAA batteries
as
shown, matching
the + and --
end of each battery in the
compartment.
C. Replace the cover.
5. Turn on the TV
Press -IV on the remote.
Press POWER on the TV.
2
Need help?
Do you have a question about the PS27108 and is the answer not in the manual?
Questions and answers