ProScan PS27108 Owner's Manual page 19

Using Your TV and Remote
With Audio Equipment: Programming and Basic Operation
Refer to the Connection Book or your Audio equipment owner's manual to hook
up your audio equipment. Your remote controls only RCA audio equipment
such as a radio, CD player, tape player, turntable, or amplifier. The
remote may need to be programmed for your equipment. This remote
may not operate all models of the brands that are shown below. Use the
codes below or on the sheet packed in with your remote.
Program the remote for
audio equipment
Basic Operation
Audio Codes
RCA / Dimensia
AM/FM ...........................03
CD ....................................07
Tape .................................06
Phono ..............................05
Aux ..................................04
A. Point the remote at the audio
equipment and hold AUDIO.
B. Enter the code from the code
list.
C. Release AUDIO.
D. Press POWER to turn it on. If
nothing happens, try pressing
AUDIO and then POWER.
E. Repeat A-D with another code
if the first one does not work.
a.
B.
C.
D.
Point the remote at the audio
equipment and press AUDIO.
Press POWER to turn it on.
Use the buttons on the remote
that relate to audio functions.
Not: all buttons highlighted
may work with your
equipment.
Turn the audio equipment off
using the audio component's
power off button.
15