To A Progressive Scan Tv Or Component Video Input; Setting Up Progressive Scan Feature - Philips HTS8100 User Manual

I
Getting Started (co.ti.ued)
@
Setting up Progressive Scan
feature
(for Progressive Scan TV only)
The progressive scan displays twice the
number of frames per second than
interlaced scanning (ordinary normal TV
system.) With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
Before you start.,.
Ensure chat you have connected this unit
to a progressive scan TV using the Y Pb
Pr connection (see 'Option 3: Connecting
to a Progressive Scan TV or component
video input'.)
Turn on the TV to the correct viewing
channel for this unit.
.... ÷ Make sure that the TVs progressive
scan mode is turned off (or set to
interlaced mode.) Refer to your TVs user
manual
@ Turn on this unit and press DISC on the
remote control.
@ Press SETUP on the remote control
@ Press cursor right key repeatedly to
select { Video Setup Page. }
@ Read the notification message on the TV
and confirm your action by selecting the
in the menu and press OK.
There will be no picture on your TV
at this state undl you have turned
on
the
progressive scan mode
on
your TV.
@ Turn on your TV progressive scan mode,
refer to your TVs user manual.
.... ÷ A message appears on the TV.
@
Confirm your action by selecting the
in the menu and press OK.
.... ÷ The setup is now completed and you
can start to enjoy the high quality picture.
If no picture is displayed
@ Press OPEN/CLOSE
A
@ Press cursor left key on the remote
control
@ Press AUDIO on the remote control.
Helpful Hints:
- Ira blank/distorted screen appears, wait
for 15 seconds for the auto recovery.
- There are some progressive scan TVs that
are not fully compatible with this unit,
resulting in an unnatural picture when
playing back a DVD VIDEO disc in the
progressive scan mode. In such a case, turn
aff the progressive scan feature an this unit
and your TV.
@ Move to { Progressive } > { On } in the
menu and press OK to confirm.
24