Using The Remote Control - Philips HTS8100 User Manual

Remote Control (continued)
Using the remote control
CAUTION!
- Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
- Never mix batteries (old and new
or carbon and alkaEne, etc.).
- Batteries contain chemical
substances, they should be disposed
of properly.
@
@
@
@
@
Open the battery compartment.
Insert two batteries type R06 or AA,
following the indications (÷ --)inside
the compartment.
Close the cover.
Point the remote control directly at the
remote sensor fiR) on the front panel.
Select the source you wish to control by
pressing the DISC, DOCK, USB, RADIO,
AUX, DIGITAL IN, TV or PIP3 LINE-IN
button on the remote control.
@ Then select the desired function (for
example 14_1, I_1.)
12