Philips 17PF9945-37 Directions For Use Manual page 57

_videe TV can be used as a PC Monitol: A PC
o signal must be present or the TV will
go into standby mode.
Follow the steps below to access and adjust the
onscreen PC" Menu controls.
Press the PC button on the remote con-
trol to place the TV in the PC Mode,
Press the MENU button on the remote
control to display the PC Mode onscreen
menu. The AUDIO SELECTION option
will be highlighted.
Press the CURSOR UP or DOWN
buttons to highlight any of the listed
onscreen menu options.
Choose from:
AUDIO SELECTION - Will allow the
Audio Source to come from the PC, the
TV, or the FM Radio.
BRIGHTNESS & CONTRAST -
Allows you to adjust the Brightness and
Contrast picture levels.
ADJUST COLOR - This control allow
you to set the Color Temperature of the
picture. Choose between the Normal,
Cool or Warm pre-defined setlings,
VIDEO NOISE - Will allow you to
remove any flickering Vertical or
Horizontal bars thai may appear on the
screen.
ADJUST POSITION - This control
will allow you lo move the onscreen pic-
ture horizontally or vertically for better
viewing pleasure.
AUTO ADJUST - The Auto Adjust will
automatically adjust the control based on
the signal being received to give the best
possible picture.
PIP CONTROLS - change the Size and
Position of the PIP window on the
screen when the PIP button is used.
MODE SELECT - Enter the TV or FM
Mode using this control,
RESET TO FACTORY SETTINGS -
Will reset all setting lo the factory
default values.
4
VIEW FORMATS - Choose between
the NATIVE (the formal that is dictated
by the type of accessory device being
used) and WIDE SCREEN formals.
Press the CURSOR RIGHT button lo
enter the sub-menu of any of the high-
lighted onscreen menu controls.
Use the CURSOR UP, DOWN,
RIGHT or LEFT buttons to navigate,
adjust or activate the specific controls.
Press the STATUS/EXIT button to
remove the onscreen menu from the TV
screen when finished.
©
®®®
®®@
4
,5
_Ean_L _
m,.
_TI_E
57