Philips 17PF9945-37 Directions For Use Manual page 39

your remote control is set to work your TV
nd many infrared remote (IR) control
VCRs, Cable Boxes, Satellite Systems, DBS,
DVD, etc. However, an easy onetirue step may
be necessary befi)re the remote will work your
VCR.
Try this initial Direct Access Method to see if'
going on to the fidlowing section is necessary.
Place the TV/DVD/ACC Mode
Switch in the proper position.
Point the remote control at the device
and press the POWER button.
Does the remote turn the device ON?
If YES, stop and try other function buttons on
the remote. If they also work the device, then
the remote is ready and no further sleps are
needed,
If NO, continue...
First look up a FOUR-DIGIT remote
control number for your brand of
Device before going through the simple
steps on the following page,
Find your Four-Digit Code on pages
42-44.
VCR
\
I
Satellite
Receiver
I
PiP POSITION CC
®®®®
TV PROG. LIST CLOCK
ovo ®@
SLEEP TV/VCR SOURCE FORMAT
A Q@OQ
I x
Cableconverter
PFVL
If more than one number is listed, you may
have to try more than the first Four-Digit code
given in order to locate your Device's remote
code.
NOTE: Setting up the remote is for use with
external accessory devices only and not for use
with other television brands.
(9@@
@@@
39